HD ATHLETIC NX POWER HALF COMBO RACK

hammer-strength-hd-athletic-nx-power-half-102902349023

HD ATHLETIC NX POWER HALF COMBO RACK

Get the best of both worlds with the NX Power Half Combo Rack. A full cage on one side and a space-efficient Half Rack training station on the other create the ultimate in training flexibility.

Request a Quote

HD ATHLETIC NX HEIGHT

91″ (231.14 cm) OR 86″ (218.44 cm) HEIGHT
Why two different height options?

Each HD Athletic NX Rack training upright can fit in rooms with a standard 8′ (2.44 cm) ceiling. Create the perfect combination to match ceiling height limitations and user height requirements.

NX STORAGE DEPTH

15” STORAGE DEPTH
15” (38.1 cm) storage depth is best for space-constrained weight rooms that can’t bolt down HD Athletic Pro Perimeter.

21” STORAGE DEPTH
21” (53.3 cm) storage depth provides more space between the Training Upright and the Storage Upright, which creates more room for bench depth and spotter access.

HD ATHLETIC NX COMBO RACK STORAGE

SINGLE STORAGE

When space is at a premium, choose the single storage for a compact Combo Rack. XL weight horns are recommended for this configuration to allow for enough plate storage for both training stations.

DOUBLE STORAGE

An ideal solution to maximize plate storage with Combo Racks, the Double Storage creates plenty of weight horn capacity to efficiently feed both training stations. Double Storage adds a minimum of 18” (46cm) depth to Combo Racks.

PULL UP OPTIONS

hammer-strength-hd-athletic-nx-monkey-bar-circle

hammer-strength-hd-athletic-nx-2handle-bar-circle

hammer-strength-hd-athletic-nx-offset-bar-circle

hammer-strength-hd-athletic-nx-2x3-xmember-circle

MONKEY BAR

The most traditional of all pull-up bars. The Monkey Bar has high versatility and is the lowest cost option. The bar is 1.25″ in diameter and uses a high-wear, textured paint to enhance grip and extend the finish life.

2-HANDLE BAR

A Hammer Strength classic, the 2-Handle pull-up bar features 1.25″ handles in mixed configurations. This pull-up option features grips on each handle and embodies one of Hammer Strength’s true design philosophies: supreme ergonomics.

OFFSET BAR

Maximise space with the Offset Bar. With two 1.25″ textured pull-up bars, this option provides both high and low pulling points with a 9″ separation to compensate for lower training uprights.

2X3 XMEMBER

The 2X3 Xmember should be used in facilities that plan to use camera-based training systems.

Compatible with HD Athletic Ball Grips (HDT-BCG3).

REAR X MEMBER OPTIONS

hammer-strength-hd-athletic-nx-hammer-strength-super-duty-circle

hammer-strength-hd-athletic-nx-hammer-strength-sign-circle

hammer-strength-hd-athletic-nx-hammer-strength-custom-circle

SUPER DUTY XMEMBER

The Super Duty Xmember adds structural rigidity to your Rack and serves as a mount for custom signs.

HAMMER STRENGTH SIGN

Make your Rack stand out with a Hammer Strength sign. The backer plate is the same colour as the uprights and the front plate is high-wear charcoal for colour contrast.

CUSTOM SIGN

Looking for custom branding opportunities on your Rack? Well, look no further! Our custom signs can be made using laser cuts, vinyl stickers, or a combination of the two.

STORAGE ADD-ONS

hammer-strength-hd-athletic-nx-hammer-strength-low-bar-storage

hammer-strength-hd-athletic-nx-hammer-strength-hanging-bar-storage

hammer-strength-hd-athletic-nx-hammer-strength-72inch-storage-racks

LOW BAR STORAGE

A convenient, low-profile bar storage solution. Inside the sleeve of each Low Bar Storage is a plastic guard to protect your bar when dropping it into the storage cylinder. The cylinder is angled slightly away from the rack to ensure the bar doesn’t make contact with the rack and damage the paint.

HANGING BAR STORAGE

Hanging Bar Storage holds the barbell by its sleeve and is finished with a matte charcoal powder coat. This solution can be mounted on any Xmember.

72″ STORAGE TRAYS

Add any 72″ Storage Members from HD Athletic to connect your HD Athletic NX Racks.

Available options include:

2 pipes for bumper plate and ball storage,
accessory tray for kettlebells and soft accessories,
dumbbell tray, and
stability ball storage.

ADD-ONS

hammer-strength-hd-athletic-nx-hammer-strength-standard-bar-support

hammer-strength-hd-athletic-nx-hammer-strength-premium-bar-support-circle

hammer-strength-hd-athletic-nx-hammer-strength-standard-bar-catches-circle

STANDARD BAR SUPPORTS

The Standard Bar Support is a welded 3/8″ plate protected by an injection-molded urethane cover for bar protection. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights.

The profile of the landing and resting zones are ASTM and EN compliant.

PREMIUM BAR SUPPORTS

The Premium Bar Support is welded 1/2″ plate protected by an oversized, injection-molded urethane cover for bar protection. The landing area is a 2″ resting zone that tapers to 1.5″ for wider hand clearance. The finish is a durable high-wear charcoal powder coating with a chrome pin. The interior is wrapped with 3/8″ urethane paint guards to prevent any metal-on-metal contact with the rack.

STANDARD HR BAR CATCHES

The Standard Half Rack Bar Catches are 18″ (46cm) in length and use a 3-sided urethane guard to shield the catch and the bar. The catch pins easily from the face of the rack and locks in place. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights.

ASTM rated to 405 lbs.

PREMIUM HR BAR CATCHES

Premium Half Rack Bar Catches are 22″ (56cm) long and feature a three-sided urethane guard that protects both the catch and the barbell. Two shock absorption pads and vertical displacement brackets prevent damage to the rack. The Premium Catch attaches with a pin through the side of the rack for added strength and stability. The finish is durable high-wear charcoal powder coating with a chrome pin.

ASTM rated to 495lbs.

hammer-strength-day-band-pegs-werw-werwe23410382-1920-copy

hammer-strength-hd-athletic-nx-hammer-strength-power-pivot-circle

FLEXIBLE BAR CATCHES

Reinforced-nylon Flexible Bar Catches prevent knurling damage to your barbell from drops. They also reduce the noise and bounce of the bar when dropped. Catches are easy to remove from the uprights without the need for tools.

ASTM rated to 675 lbs.

PREMIUM PR BAR CATCHES

Designed with 2″ x 3″, 11-gauge tubing with a 1/2″ solid steel rod from upright to upright. The finish is durable high-wear charcoal with a three-sided urethane guard that protects both the catch and the barbell. All rack contact areas include 3/8″ urethane paint guards.

ASTM rated to 675 lbs.

BAND PEGS

The original HD Athletic Band Pegs work perfectly NX Racks as an anchor to mount resistance bands or for band storage.

POWER PIVOT

The Power Pivot provides a rotating mount for a variety of push, pull, and rotational barbell exercisers.

hammer-strength-hd-athletic-nx-hammer-strength-72-connector-circle

NORDIC HAM

Compatible with all HD Athletic products, the 20″ Nordic Ham can be used for exercises like single leg squats and Nordic hamstring curls. The add-on features a chrome pin and paint guards that protect the finish of the upright.

72″ RACK CONNECTORS

Monkey and Square Rack Connectors attach HD Athletic NX Racks together for more strength training versitility.

Technical Specifications

Product Name	HD Athletic NX Power Half Combo Rack
Category	Racks
Product Code	HDW-PHCR
Colour	Standard, Premium, Custom
Upright Height	86″ (218cm) or 91″ (231cm)
Pull-up Options	Monkey Bar, Offset Bar, 2-Handle Bar, 2×3 Square
Rear XM Options	2×3 Square, Super Duty XM (compatable with custom sign), Hammer Strength Sign
Bar Catches / Supports	Standard Bar Supports, Premium Bar Supports, Standard HR Bar Catches, Premium HR Bar Catches
Storage Type	Single Storage (15″ / 38.1cm), Single Storage (21″ / 53.34cm), Double Storage (15″ / 38.1cm), Double Storage (21″ / 53.34cm)
Weight Horns	4 Pairs – Standard, 2 Pairs – Standard, 2 Pairs – Long, 4 Pairs – Long